DSB

Description:
Pressure to the unit is continuously monitored by a
piezo-resistive sensor and converted into a proportional
voltage signal. The signal is then amplified and delivered
as a PNP signal.

Media: dry, lubricated or unlubricated compressed air or
non-corrosive gases

Supply_voltage:
12...30 V DC, reverse voltage protection,
current consumption max. 30 mA,
output current max. 250 mA

Adjustment_Mode:
hysteresis or window, switching point and hysteresis, NO or NC,
closing or opening time, bar, psi, MPa, kg/cm² etc.
Display = current pressure, highest pressure, measurement errors

Switching_output:
2x PNP freely programmable as NO or NC, max. contact load 250 mA,
short-circuit-proof

Hysteresis: adjustable from 0% to 100% of set switching point
Linearity: < 1% FS
Repeatability: < 0.2% FS
Switching_frequency: 200 Hz
LED_display: 3-digit, red 7-segment display on DSB, no display on DSC
Mounting_position: any
Error_display: via 7-segment display on DSB, via multicolour LED on DSC
Certifications: CSA-compliant, UL-listed
Shock_resistance: 10 g
Protection_class: IP 65

Temperature_range:-1 °C to 50 °C / 30.2 °F to 122 °F

Body: ABS-PC plastic, shockproof
Connection_thread: nickel-plated brass

View product description Hide product description