+49 2102 7339021

The air amplifier compresses air or nitrogen from a standard pressure of 10 bar max. to the desired
outlet pressure of 60 bar max. This is realised by cylinders with different ratios - simple, safe and
economical. No electrical installation is required and there is no energy consumption once the final
pressure has been reached. Service life 3 million cycles, full load operation 12 min max. per hour.

Media: lubricated, unlubricated and 50 µm filtered compressed air

Amplifier_station:
The pressure booster has an additional tank, pressure regulator, filter, gauge, relief valve
and switch-on valve. Pressure pulsation rates are low, air consumption peaks are compensated and
the operating pressure can be adjusted.

Drive_pressure_PA: system air to drive the air amplifier, 2…10 bar
Supply_pressure_P1: max. 12 bar, for instance nitrogen or the system air
Outlet_pressure_P2: amplified outlet or operating pressure of 20 bar to 40 bar maximum

Temperature_range: 0 °C to 60 °C / 32 °F to 140 °F
Sound_level: max. 79 dB (A)

Body: aluminium
Seals: NBR/Buna-N
Tank: coated steel, SST at AP40-0050