Productos
- Regulador de presión
- Amplificador de caudal volumétrico
- regulador de presión proporcional
- Regulación de caudal volumétrico
- Válvulas limitadoras de presión
- Presostato
- Transmisor de presión
- Dispositivos para la medición de presión
- Dispositivos de acero inoxidable
- Tratamiento de aire
- Aumentador de presión
- Componentes de protección
Create offers directly in the shop and download them!
You have added items to your personal offer.
To download your offer, please log in with your access data in the shop.
You will automatically be deducted the deposited discounts.
Don't have a customer account yet?
No problem, register as a new customer or download your offer as a guest.
Benefits of a customer account:
- Your discounts are displayed automatically
- Overview of all offers
New Customer Login Download as a guest Back
Please fill out the following form to start the download
P8
Seleccione una variante del artÃculo en la tabla de la vista general más abajo.
Descripción:
Motorised proportional flow valve with low power consumption
and resistance to contamination. Throttle setting by wear-
resistant control drives made of oxide ceramic. Throttling occurs
with drip-tight zero shut-off but no gas tightness.
Media: compressed air, vacuum or liquids up to viscosity of 40 mm²/s
Hysteresis: ± 4%
Operation:
DC, synchronous or stepping motor with standard voltage of 24 V DC
or AC ±10% residual ripple and IP 54.
All motors fulfil standards EN50.081-1, EN50.082-2 and 89/336/EEC.
DC_motor_(15/24):
Motor with feedback potentiometer for servo-amplifier.
Resistor 1kΩ ± 20 %, control e.g. by servo-amplifier.
Only part of potentiometer range is used.
Voltage for potentiometer 12 V, max. 10 mA.
DC_motor_(50/51):
With integrated position controller.
Setpoint input using jumpers = 0...10 V, 0/4...20 mA.
Input resistance 200 kΩ at voltage signal, 500 Ω at current signal.
Stepper_motor_(38):
Bipolar, by means of SAA1042A (Motorola) with drop resistance of
44 Ω per phase at a driver (full-step).
operating voltage of 24 V ± 5%. 2028 steps for 90° control disc turn,
200 Hz nominal step frequency.
Temperature_range: 10 °C to 90 °C / 14 °F to 194 °F
Protection_class: IP 54
Body: brass
Control_discs: oxide ceramic
Elastomer: NBR/Buna-N, optionally FKM or EPDM