R6,M5000

描述:
Pressure regulator R6:
Design as R7 but for bottom-sided flange assembly via fittings
and o-rings made of NBR/Buna-N. Mounting through four screws (M3)
with extremely small screw heads.

Pressure regulator RP:
This model guards against unauthorised tampering of pressure.
Alternatively available with preset pressure. The pressure is to
be set between 30 mbar and 2.8 bar. Its headroom is reduced to 49 mm.

Diverter block M5000:
M3000 features four ports sideways and one on top. All ports can
be provided with threads or blank slides, the ports sideways
optionally with connector slides.

Top_cover:
blank cover (B)
with G1/8 thread (1)
with G1/4 thread (2)
with M5 thread (10-32 UNF) (0)

Connector_slide:
to join two units and without through hole (C)
with through hole (U)

Assembly:
After loosening the bottom screw any placements of threads,
connector and blank slides are possible.
Sealing results from o-rings made of NBR/Buna-N.

Temperature_range: 4 °C to 70 °C / 39.2 °F to 158 °F

Body: glass-fiber reinforced Celcon
Inner_valve: stainless steel and Celcon
Elastomer: NBR/Buna-N

显示产品说明 隐藏产品说明