+49 2102 7339021

Inline pressure regulator with factory-set outlet pressure, reducing from e.g. 15 bar to 5 bar.
With an outlet pressure tolerance of only ±10% it is especially suitable for nailing machines.

Benefits:
Higher safety through lower pressure. Tools and equipment protected against pressure damages.
Cost reduction through substantially reduced air consumption. Longer service life.
Noise reduction for tools.

Media: compressed air or non-corrosive gases
Supply pressure: max. 25 bar

Adjustment:
Select the pressure regulator according to the desired outlet pressure.
The outlet pressure cannot be subsequently adjusted. This safeguards against tampering.

Relieving function: relieving at removal of supply pressure
Temperature range: 0 °C to 60 °C / 32 °F to 140 °F, for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: aluminium
Elastomer: NBR/Buna-N, optionally FKM