+49 2102 7339021

The flow control valve functions as a pinch valve in a new design of housing with full flow cross-section.
Since the straight valve passage has neither constrictions nor back-points, there is no danger of
clogging or blockage. Frictional loss is at a minimum.

Media:
compressed air, gases, liquids or other paste-like or powdery media
Solids are enclosed by the flexible sleeve at shut-off.

Sleeve: Highly flexible with double woven reinforcement in eight different grades. Sleeve simple to change.
Pressures:
Operating pressure max. 4.0 bar
Pilot pressure max. 6.5
Differential pressure max. 2.5 bar
Closing pressure P1 + 2.5 bar to DN 32, P1 + 2 bar from DN 40 on
Vacuum: If vacuum is greater than -100 mbar, vacuum compensation should be provided on the control side.
Accuracy: In the flow range of 0 to 70% the linearity of pilot pressure to flow is about 10% accurate.
Mounting_position: any, at horizontal mounting pilot port preferably at the top
Temperature_range: 0 °C to max. 100 °C / 32 °F to max. 212 °F, subject to sleeve material
Body: stainless steel 316L, material no. 1.4435
Sleeve: depending on selected version