+49 2102 7339021

Suitable for measurement of positive pressure, vacuum or differential pressure.

Media: compressed air or non-corrosive gases
Overpressure: see chart
Supply_voltage: 15...30 V DC standard, optionally 230 V AC ± 10%
Electrical_connector: plug with 7-pin screw terminal for cable cross-sectional area 0.14...1.5 mm²

Pneumatic_connection:
P+: pos. pressure
P-: vacuum
P+/P-: differential pressure, the higher pressure is to be connected at P+
plug nipple up to 1 bar, sleeve with union nut from 2 bar on, each for hose internal diameter of Ø 4 mm

Display:
31/2-digit LCD display, max. ± 1999, 14 mm tall, black numbers
red LED lights up at overpressure, then measurement is faulty

Output_signal: 0...10 V, impedance > 10 kΩ, optionally 4...20 mA, impedance < 500 Ω
Linearity: see chart, optionally 0.2% FS
Hysteresis: < 0.1% FS

Long-term_stability:
< 0.1% FS per year at > 25 mbar,
< 1% FS per year at > 5 mbar,
< 2% FS per year at < 5 mbar range

Temperature_sensitivity: see chart, at 0 to 50 °C / 32 to 122 °F
Repeatability: see chart
Response_time: 100 ms
Resolution: 1 digit
Temperature_range: -20 °C to 50 °C / -4 °F to 122 °F
Protection_class: IP 54
Housing: aluminium