+49 2102 7339021

The operating pressure is converted into a proportional, electrical signal by a ceramics pressure
transducer. After amplification the signal is monitored as an analogue voltage or current signal.

Media:
D7 all non-corrosive media compatible with stainless steel, nylon, silicon, silicone and epoxy
D8 compressed air, non-corrosive gases or liquids compatible with ceramics and NBR/Buna-N

Supply_voltage:
12...30 V DC, residual ripple 5%, with reverse voltage protection,
max. current consumption 1 mA

Electrical_connector: plug M12x1, 4-pin, with coupling socket
Protection_class: IP 64 according to DIN 40050

Output_signal:
4...20 mA: max. power consumption 260 mW
0...10 V: max. power consumption 50 mW

Linearity/Hysteresis:
D7 < 0.2% FS typ. < 0.5% FS;
D8 < 0.1% FS typ. < 0.2% FS

Repeatability:
D7 < 0.1% FS typ. < 0.2% FS;
D8 < 0.1% FS typ. < 0.2% FS

Long-term_stability:
D7 < 0.5% FS typ. < 1% FS;
D8 < 0.3% FS typ. < 0.6% FS

Temperature_sensitivity:
D7 < 0.03% FS typ./°C, < 0.08% FS/°C (0...50 °C);
D8 < 0.03% FS typ./°C, < 0.05% FS/°C (0...70 °C)

Vibration_resistance:
D7 2 g at 5...500 Hz;
D8 10 g at 5...500 Hz

Temperature_range:
D7 -40 °C to 85 °C / -40 °F to 185 °F;
D8 -40 °C to 100 °C / -40 °F to 212 °F

Response_time: 1 ms for 10...90% of pressure range
Shock_resistance: 50 g
Body: stainless steel 316L, mat. no. 1.4404
Measuring_cell_(D8): ceramics AL2O3 and NBR/Buna-N o-ring